Roofing dumpster rental in Provo
Need a roll-off dropped fast after your Provo roof tear-off? We set the container and pull it with the swap-out.
Roofing Tear-off Dumpster Sizing by Squares
How big a roll-off do you actually need for a roof tear-off in Provo? The math is simple: one square of asphalt shingles equals roughly two-thirds of a cubic yard. Most jobs fit a low-wall 20-yard container; our team monitors tonnage to stay under the limit; we set the roll-off exactly where you need it.
15-Yard Roofing Dumpster
- Capacity: 15 cubic yards
- Fits: 15–20 squares of asphalt shingle
- Best for: Single-layer ranch and bungalow tear-offs
Our 10-yard can fits in a tight driveway and handles shingle weight on a single haul for you.
20-Yard Roofing Dumpster
- Capacity: 20 cubic yards
- Fits: 25–30 squares of asphalt shingle
- Best for: Most two-story residential tear-offs
The 20-Yard Container works well for roofing because low side walls let crews ground-throw shingles without extra scaffolding.
30-Yard Roofing Dumpster
- Capacity: 30 cubic yards
- Fits: 35–45 squares of asphalt shingle
- Best for: Multi-layer tear-offs and small commercial roofs
The 30-yard bin handles larger tear-offs so crews finish fast and demobilize on schedule.
Asphalt Shingle Weight and Tonnage Planning
The three-tab shingle averages 250 pounds a square; architectural laminate runs closer to 400. A 25-square tear-off lands between three and five tons before underlayment, so we route a hooklift truck with the right weight limit. How does that translate to a 10-Yard dumpster? The low side walls keep the load from topping the can on the single pickup run.
We route jobs involving mixed shingle debris and framing or sheathing offcuts to our general Construction & Demolition Debris service—a different type of container—while keeping pure asphalt tear-offs on our specialized roofing line to ensure efficient waste processing for everyone.
Driveway Placement for Roofing Crew Workflow
Our drivers angle the swing-door of the roll-off toward your eave; this allows the crew in Provo to ground-throw shingles directly into the bin. We lay Driveway Boards under all heavy steel rollers before the container touches your concrete. This setup leaves a six-foot tarp perimeter for a clean nail sweep. Consult our roof tear-off container sizing for the right match, then review the asphalt shingle disposal best practices guide before we drop the can.
Drop angle
Rear door toward the roof line
Set the swing-door end facing the eave where the crew is working to streamline both walk-in loading and ground-throw debris disposal.
Surface protection
Wooden planks under every roller
Loaded shingle weight can gouge concrete; driveway boards must stay under the rear rollers for the entire rental window.
Sweep zone
Six-foot tarp perimeter
Stage magnetic sweepers on the tarp side so nail cleanup runs in parallel with loading your heavy debris.
Tile, Slate, and Metal Roof Tear-off Containers
Concrete tile, natural slate, and standing-seam metal weigh significantly more than asphalt; these materials punish a standard container that was not built for the load. We route a 30-yard low-wall bin featuring reinforced sides and a heavier floor plate to our lowboy transport. We cap the fill volume well below the visual rim to maintain legal axle weight: this ensures safety on the road. We also offer a general construction debris service for mixed loads.
Same-day Pickup for Fast Roof Project Turnover
Tear-offs run tight crews; the roll-off shouldn’t hold things up. Dispatch coordinates same-day haul-out to match demobilization, freeing the driveway for inspection, gutter reinstall, or the homeowner right away. Provo crews route a quick swap-out so the site clears before the crew packs it in!